Kerakoll Waterproofing
Akshitha Enterprises is the
Authorised Dealers for KERAKOLL Waterproofing Products - Aquastop 120 (Tape), Aquastop AR1 (Mesh), Aquastop Nanoflex
® (Single Component Waterproofing), Kerabuild
® Eco Osmocem, Kerabuild
® Eco Epobond, and GeoLite
® Gel products.
Aquastop Nanoflex® (Single Component Waterproofing) - Features & Advantages
Breathable, anti-alkali and chlorine-resistant, elastomeric, Nanotech Technology based cementitious membrane for the flexible waterproofing with high levels of adhesion and durability of surfaces before laying tiles using adhesives.
Aquastop Nanoflex® develops a smooth, creamy mixture paste with a consistency that can be adjusted by varying the amount of water, allowing for optimal workability according to specific site conditions. It ensures maximum adhesion to the bonded system.
Floors and walls, for internal and external use
Flexible and robust and Highly breathable
Crack-Bridging ability even at low temperatures
Specifically intended for laying using H40 Gel or Bioflex
Suitable for overlaying
20% better coverage than two-component systems
The Nanotech Technology, makes it complete water repellent, chemically stable and permanent elastic
Pack: 20 kg Bags with handle, Coverage: ≈ 1.2 kg/m² per coat, Shelf life: ≈ 12 months
DOWNLOAD Product Catalogue
Aquastop 120 (Tape) - Features & Advantages
Flexible NBR waterproof joint for perimeter and fractionizing joints in waterproofing systems. For use under ceramic and vitrified tiles and natural stone. Bonds directly on application.
Aquastop 120 ensures continuous waterproofing even at expansion joints.
High elasticity and UV light resistance
For internal and external use
Ideal for bonding with eco-friendly Aquastop Nanoflex® Eco membrane
Guaranteed waterproofing of all types of non-structural fractionizing and connection joints
Alkali-resistant
Pack: Tape 120 mm width - 50 m roll, Internal corner - box 20 pcs., External corner - box 20 pcs.
DOWNLOAD Product Catalogue
Aquastop AR1 (Mesh) - Features & Advantages
Alkali-resistant reinforcing mesh without memory effect, for Aquastop Nanoflex.
The use of Aquastop AR1 guarantees the verification of the total weight of the product applied, in order to guarantee that the substrate is totally covered, and acts as a guide for the product’s application in order to obtain a waterproofed and even substrate.
Superior mesh with Aquastop Nanoflex® and Aquastop Flex®
High resistance to the basic environment
High shear strength in both directions
No memory effect
Pack: 50 m roll
DOWNLOAD Product Catalogue
Aquastop Flex - Features & Advantages
Two-component, elastomeric, cement-based waterproofing covering, reinforced with acrylic resin, for concrete and masonry surfaces, providing high levels of adhesion and durability of surfaces before laying with adhesives.
Aquastop Flex creates a water-resistant layer on wet areas, balconies, refuge slabs and shower cabinets.
Flexible and tough
High compatibility with cement-based adhesives
Internal and external floors and walls
High adhesion on cement based substrates
Recommended for wet areas
CFTRI Certified - safe for potable water contact
High adhesion to absorbent and non-absorbent substrates
Breathable
High workability
Suitable for overlaying
Pack: Part A 15 kg bag / Part B 7.5 kg can, monopack Part A 2 kg / Part B 1 kg Coverage: ≈ 2 kg/m² in 2 coats, Shelf life: ≈ 12 months
DOWNLOAD Product Catalogue
Metric Osmotic - Features & Advantages
Waterproofing, osmotic, cement-based protective product for concrete.
Metric Osmotic is a single-component, non-sag covering, resistant to positive and negative hydraulic pressure.
White and grey
Non-sag
Certified EN 1504-2 (C)
Certified as suitable for the containment of drinking water
Excellent levels of resistance to abrasion
High resistance to severe chemical attacks
Pack: 25 kg bags, Coverage: for trowel application ≈ 1.5 kg/m² per mm of thickness, for brush application ≈ 1.4 kg/m² per mm of thickness, Shelf life: ≈ 12 months
DOWNLOAD Product Catalogue
KeraKoll® GeoLite Gel - Features & Advantages
Thixotropic adhesive, for structural bonding and grouting.
Geolite Gel is a two-component, epoxy thixotropic gel system for anchoring and fixing metal elements.
Thixotropic
High workability even at high temperatures
Excellent adhesion to any substrate
Reaction to fire Euroclass C-s2, d0
High glass-transition temperature Tg
Pack: part A 5 kg bucket, part B 1,66 kg bucket, Coverage: ≈ 1.6 kg/m² per mm of thickness, Shelf life: ≈ 12 months
DOWNLOAD Product Catalogue
Aquastop Protect - Features & Advantages
Certified, single component, polyurethane top-coat. Cold applied and cold cured for protection of polyurethane waterproofing coatings to be kept exposed.
Aquastop Protect develops a UV-stable and highly permanent elastic protection coat for PU membranes to be used in exposed areas.
Ease of application by brush, roller or airless spray
Increases the abrasion resistance
Provides high sun reflectance, contributing to thermoinsulation
UV and colour stable
Resistant to water, heat and frost
Allow foot traffic in domestic areas
Pack: 5 kg metal pail, Coverage: ≈ 120 - 200 g/m², applied in two coats, Shelf life: ≈ 9 months
DOWNLOAD Product Catalogue
Aquastop Base - Features & Advantages
Certified single component, solvent based polyurethane primer. Quick drying, cold applied and cold cured, it’s deep penetrating and consolidating the absorbent surfaces.
Aquastop Base is ideal as a primer on absorbent surfaces prior the application of Aquastop Extraflex.
Ease of application by brush and roller
Quick drying
Excellent penetration on absorbent surfaces
Excellent tensile strength
Chemical resistant
Suitable for internal and external areas
Pack: 10 kg metal pail, Coverage: ≈ 200 g/m² per coat, Shelf life: ≈ 12 months
DOWNLOAD Product Catalogue
Aquastop Extraflex - Features & Advantages
Certified, single component, highly flexible polyurethane membrane.
Cold applied and cold cured for waterproofing applications. Based on elastomeric hydrophobic polyurethane resins it ensures a long lasting waterproofing of large surfaces. Aquastop Extraflex develops a smooth polyurethane membrane that cures by reaction with ground and air moisture & provides excellent mechanical and chemical, thermal and UV resistant properties.
Excellent Crack Bridging ability
Excellent adhesion to surface
Ease of application by brush, trowel, roller and airless spray
Monolithic – no laps, welds or seams
Highly resistant to water
Excellent adhesion to concrete
Resists positive water pressure
Resists to root penetration
Excellent chemical resistance
Suitable for internal and external areas
Pack: 25 kg metal pail, Coverage: ≈ 1.65 kg/m² to 1.8 kg/m² to have 1 mm DFT, Shelf life: ≈ 12 months
DOWNLOAD Product Catalogue
Aquastop Geofabric - Features & Advantages
Polyester non-woven geotextile reinforcing sheet for use in combination with polyurethane membranes.
Aquastop Geofabric is mainly used as a reinforcing sheet for use in combination with liquid-applied polyurethane membranes for waterproofing applications.
High elasticity.
Suitable for internal and external areas.
Simple application.
Excellent tear strength.
UV-stable.
Compatible with polyurethane membranes.
Pack: 1 m x 100 m length / 0.2 m x 100 m length, Shelf life: ≈ 12 months
DOWNLOAD Product Catalogue
